Click! 514
Sets devices to Logging mode à
Resets the device factory defaults à
Multicolored LEDs have activity indicating function:
■
Red LED illuminates when device has power à
Green LED (TD) illuminates when data is transmitted à
Yellow LED (RD) illuminates when data is received à
Multicolored LEDs also act as operation mode indicators
■
Two banks of LEDs (yellow and red) display submenu selections
■
and application information
Supported by user-friendly GUI (graphical user interface) for
■
control of program parameters
DIP switches for selection of run mode versus programming
■
mode, multi-function inputs and supply voltage monitor thresh-
olds
Testing Features
Push-button can be used to generate output signals to test
■
system conguration
Pocket PC & PC Conguration Software
Comes with Click! Supervisor, conguration software with the
■
following features:
Runs on Pocket PC or Windows desktop or laptop PC (Win- à
dows 2000 and newer)
Can save/open a conguration to/from a le, allowing a à
common conguration to be easily programmed into many
devices
Has customizable driver(s) that are stored in an XML à
le that describes the settings for a devices as well as
graphical user interface for that driver in the conguration
software
Ordering Information
Part Number — WX-CLK-514
Recommended Accessories
Acumen DataBridge SDR2-CF
■
Wavetronix
78 East 1700 South
Provo, UT 84606
Phone: 801-764-0277
Fax: 801-764-0208
Email: sales@wavetronix.com
Website: www.wavetronix.com
Technical Specications
Physical
Weight: 0.29 lbs (0.1 kg)
■
Physical dimensions: 4.5 in. × 4 in. × 0.9 in. (11.4 cm x 10.2
■
cm x 2.3 cm)
Ambient operating temp: -29°F to 165°F (-34°C to 74°C)
■
Humidity: up to 95% RH
■
Mounting
DIN rail–mountable
■
Hot-swappable
■
Power
Power supply voltage: 10 to 30 VDC
■
Power consumption: 0.8 W
■
Connections
Power:
■
5-position connector from the T-bus à
Voltage input monitoring with settable thresholds of 11.7 à
or 22.7 VDC
Four independent physical serial ports
■
RS-232 Front: DB-9 female DCE connector with DIP switch à
override to select between programming and run mode
RS-485 Top: 5-position connector for connecting from à
T-bus
RS-232 Top: Pluggable screw terminal à
RS-485 Top: Pluggable screw terminal and an RJ-11 jack à
Two multi-function digital input ports
■
Low-level AC input monitoring via clamp-on split-core à
current transformers with 1 W 120 VAC load threshold
suitable for monitoring incandescent or LED signal indica-
tion status
Contact closure input monitoring circuit that also serves to à
monitor low-level DC logic with threshold at 2.5 V
DC voltage input monitoring with selectable thresholds of à
9, 11.7 and 23.4 VDC
Maximum input event frequency of 250 Hz à
Two solid state contact closure output ports
■
250 Hz output signaling capability à
Communication
Converts RS-485 to RS-232
■
Baud Rate
Operates at baud rate of 9600 bps
■
Conguration Features
Push-button on faceplate does the following:
■
Sets device to Set up mode à
Sets device to Programming mode à
www.wavetronix.com
2
(63 pagine)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale